Drying Laundry; Emptying The Collected Water; Pat Testing - Prem-I-Air EH1104 Instructions Manual

To dry laundry, hang the laundry on a drying rack or clothes horse, preferably in
an enclosed space such as a small room. Place the EH1104 nearby. The ideal
arrangement is with the EH1104 at the side of the drying rack (allow 400mm
clearance).
DO NOT allow any of the clothes to obstruct the air intakes or exhausts of
the EH1104.
DO NOT allow water to drip on the EH1104. Adjust the louvre to direct the
airflow on to the drying rack, and set the EH1104 on POWERFUL mode. This will
dry the clothes quickly and efficiently and will prevent the excessive humidity
caused by drying clothes indoors, which can lead to mould growth. If not using
continuous drainage, inspect the EH1104 regularly and empty the bucket when it
is full.

EMPTYING THE COLLECTED WATER

If the appliance is not going to be used for a long time:
1. Empty and clean the bucket.
2. Unplug from the mains
3. Clean the appliance
4. Store in its original packaging
When used in a workplace, this product must be safety-tested yearly by a
qualified electrician (PAT Tested) in order to comply with the Electricity at Work
Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.

DRYING LAUNDRY

If not using a drainage hose, empty the bucket
when the "WATER FULL" indicator lights.
Pull the bucket out as shown.
Empty the water down a drain.
STORAGE

PAT TESTING

Page 4