Switching On Eco Mode; Mowing And Mulching; After Finishing Work - Stihl RMA 510 Instruction Manual

14 After Finishing Work

1
The positions are indicated on the lawn mower.
► Pull lever (1) from the notch and move to the desired
position.

13.3 Switching on ECO Mode

When the ECO mode is switched on, the mower detects the
current operating conditions and automatic selects the most
suitable cutting blade speed.
This helps extend the battery runtime.
► Open the lid (1) as far as stop and hold it there.
► Set the ECO switch (2) to I.
► Close the lid (1).
0458-723-9921-B
1
2

13.4 Mowing and Mulching

► Push the mower slowly and steadily forwards.
14 After Finishing Work
14.1 After Finishing Work
► Switch off the mower, remove the activation key and
battery.
► If the mower is wet: Allow the mower to dry.
► If the battery is wet: Allow the battery to dry.
► Clean the mower.
► Clean the battery.
English
21