Error Message; Specifications; R Remote Control Unit; U (Rc-272) - Denon DCM-5000 Operating Instructions Manual

18

ERROR MESSAGE

Error messages may appear on the panel's display window if a disc cannot be played or if the set stops operating. If this
happens, follow the instructions on the table below.
"Error 0*2* 000" to
"Error 0*34 000" appears on the
display.
("*" is a number code or alphabet A to F)
"Error 4827 ***" or
"Error 4828 ***" appears on the
display.
("***" is a number code)
A code from "Error 4825 ***" to
"Error 4842 ***" appears on the
display. (except for the 4827 and 4828)
("***" is a number code)
If the error code except for the table above appears, please inform your sotre of purchase of the displayed error code.
19

SPECIFICATIONS

ANALOG
ZONE 1/ZONE 2
No. of Channels:
Frequency Response:
Wow & Flutter:
Output Level:
ZONE 1
Dynamic Range:
Signal-to-noise Ratio:
Harmonic Distortion:
ZONE 2
Dynamic Range:
Signal-to-noise Ratio:
Harmonic Distortion:
DIGITAL
Output:
HDCD ® and High Definition Compatible Digital ® are registered trademarks of Pacific Microsonics, Inc.
* Design and specifications are subject to change without notice in the course of product improvement.
The disc is loaded upside-down in the disc rack or the disc is dirty or scratched.
Check the disc again.
If the problem persists, please inform your store of purchase of the displayed error
code.
The disc rack may not be fully inserted in the set.
Open the door and press the disc rack in again until it locks (until a click is heard).
After closing the door, turn the power off, then turn the power back on to start up the
set.
If the problem persists, please inform your store of purchase of the displayed error
code.
Please inform your store of purchase of the displayed error code.
2 Channels
2 ~ 20,000 Hz
Below measurable limit:
( 0.001 % W.peak)
2.0 V
100 dB
110 dB
0.005 % (1 kHz)
96 dB
100 dB
0.008 % (1 kHz)
75 Ω/ohms)
COAXIAL (0.5 V
P-P
(ZONE 1/ZONE 2)
DISCS Compact Disc format
GENERAL CHARACTERISTICS
Power Supply: AC 120 V, 60 Hz
(for North America model)
AC 230 V, 50 Hz (for Europe model)
Power Consumption: 42 W
Dimensions: 434 (W) x 243 (H) x 474.5 (D) mm
(17-3/32") x (9-9/16") x (18-43/64")
Weight: 16.2 kg (35 lbs 11 oz)
REMOTE CONTROL
UNIT RC-272
Remote Control
System: Infrared pulse system
Power Supply: 3 V DC; two R6P
(standard size AA) dry cell batteries
External Dimensions: 68 (W) x 233 (H) x 20 (D) mm
(2-43/64") x (9-11/16") x (25/32")
Weight: Approx. 160 g (5.6 oz)
ENGLISH
41