Denon DVD-2200 Operating Instructions Manual page 29

t When "BLACK LEVEL" is selected:
DARKER
Reduces the standard level of the video output signal's black level.
Set this if the image on the TV is far too bright.
LIGHTER (Factory default)
Sets the video output signal's black level to the standard level.
y When "PROGRESSIVE MODE" is selected:
MODE 1 (level detection mode)
(Factory default)
This is a mode for high precision detection of the source type from the
level of the video signals recorded on the DVD.
For DVDs on which the flag (identification signal) data is recorded
3
incorrectly, the picture quality may decrease when flag detection is
conducted.
This mode is effective in such cases.
MODE 2 (flag detection mode)
This is a mode for detecting the source type from the source flag
(identification signal) recorded on the DVD.
In dark scenes, distinguishing between video signals and noise signals
with level detection is difficult and the picture quality may decrease.
This mode is effective in such cases.
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit by pressing the SETUP button
on the remote control unit.
V I DEO SE TUP
T V ASPEC T
TV TYPE
V I DEO OUT
ST I L L MODE
BLACK L EVE L DARKER
PROGRE SS I V E MODE L I GHT E R
E X I T SE TUP
SE L EC T : DEC I S I ON : ENTE R BUT TON
V I DEO SE TUP
T V ASPEC T
TV TYPE
V I DEO OUT
ST I L L MODE
BLACK L EVE L
PROGRE SS I V E MODE MODE 1
MODE 2
E X I T SE TUP
SE L EC T : DEC I S I ON : ENTE R BUT TON
ENGLISH
29