Audio Setting; Speaker Setting - Denon DVD-1200 Operating Instructions Manual

DVD SETUP

Audio Setting

Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
1
Press the SETUP button in STOP mode.
2 Press the B button to select CUSTOM, then press
the ENTER button.
• CUSTOM mode will appear.
3 Press the s or B button to
select AUDIO, then the ENTER
button to confirm.
4
Press the K or L button to select the below items,
then press the ENTER button.
DRC (Dynamic Range Control)
(Default : OFF)
• To compress the range of sound
volume.
DOLBY DIGITAL (Default : ON)
QUICK
Set to ON when the player is con-
nected to Dolby Digital Decoder.
(ON : Output by Dolby Digital)
(OFF : Convert the Dolby Digital to
PCM)
DTS (Default : ON)
ON : Output by DTS sound
Set to ON when the unit is con-
nected to DTS Decoder.
LPCM SELECT (Default : OFF)
• Set to ON when outputting in
48kHz.
When playing disc with copyright Protection
• If you select OFF, copyright protection will be activated
and sound will be down sampled at 48kHz.
BASS ENHANCER (Default :
OFF)
ON : Output the sound from the
subwoofer.
NOTE:
• Once "NONE" is selected for
SUB WOOFER in the Speaker Configuration menu, the
setting of BASS ENHANCER will be automatically shift-
ed to "OFF."
AUDIO CHANNEL (Default : MULTI CHANNEL)
2 CHANNEL : Output 2ch sound
MULTI CANNEL : Output Multi channel sound
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
5
Press the SETUP button to exit.
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
BASS ENHANCER OFF
AUDIO CHANNEL
AUDIO
AUDIO CHANNEL
OFF
2 CHANNEL
ON
MULTI CHANNEL
ON
OFF
MULTI CHANNEL

Speaker Setting

When MULTI CHANNEL is selected for audio channel, some
speaker settings will be required.
1
Press the K or L button to select MULTI CHAN-
NEL, then press the ENTER button.
2
Press the K or L button to
select the below items, then
press the ENTER button.
OFF
ON
SPEAKER CONFIGURATION
ON
OFF
• Press the K or L button to select
MULTI CHANNEL
the speaker to set, then press
the ENTER button.
OFF
ON
• Press the K or L button to select
ON
OFF
the speaker size, then press the
MULTI CHANNEL
ENTER button.
OFF
FRONT(L/R), CENTER, SURROUND(L/R)
ON
ON
OFF LARGE: Select this when the connected speaker is capable
MULTI CHANNEL
of playing back sounds of 100Hz or less.
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or less.
NONE: Select this when it is not connected. (It cannot be
set NONE on the FRONT speaker.)
SUB WOOFER
YES: Select this when SUB WOOFER is connected.
OFF
ON
NONE: Select this when it is not connected.
ON
OFF
NOTES:
MULTI CHANNEL
• "NONE" is not available for SUB WOOFER when
"SMALL" is selected for FRONT(L/R).
• "SMALL" is not available for FRONT(L/R) when "NONE"
is selected for SUB WOOFER.
• "ON" is not available for BASS ENHANCER when
OFF
"NONE" is selected for SUB WOOFER.
ON
ON
OFF
• When in playback of DVD audio, the sound may not come
MULTI CHANNEL
out as set due to restrictions in the disc or the player.
• During DVD-Audio playback, the Low Pass Filter (which filters
out the sound with the sound wave frequency over 100Hz) of
the SUB WOOFER will be turned off with the following speak-
er setting. Otherwise, the Low Pass Filter will be turned on.
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: YES
SURROUND(L/R): LARGE
OFF
ON
DELAY TIME
ON
OFF
To enjoy 5.1-channel surround sound, the distance between the lis-
MULTI CHANNEL
tening position and all speakers (excluding the Sub woofers) should
ideally be set at a uniform distance on a circle. If the speakers can-
not be set at this manner, the ideal listening position can be virtually
created with the delay time setting.
Use the K or L button to select the
setting item, then press the ENTER
button.
• Press the K or L button to select
the speaker to set, then press
the ENTER button.
DISTANCE (Default : FEET)
METERS(when the ENTER button is pressed):
The unit of distance is set to meters ("m").
FEET(when the ENTER button is pressed):
The unit of distance is set to feet ("ft").
– 26 –
AUDIO
MULTI CHANNEL
Speaker Configuration
DELAY TIME
CHANNEL LEVEL
AUDIO
Speaker Configuration
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
AUDIO
FRONT(L/R)
LARGE
SMALL
AUDIO
DELAY TIME
DISTANCE FEET
FRONT(L/R) 12ft
CENTER 12ft
SURROUND 12ft
DEFAULT ON
EN