Audio Setting; Ratings Control; Rating Level; If You Forget The Password - Denon DVD-1740 Operating Instructions Manual

1
=~~~~1.
,
,
~ON
lPCtJ SELECT OFF
DOL8VD,GIlAL BITSTREAM
DTS BITSTREAM
AUDIO MODE HOMI
1
=~~!ff~.
~I~
-
DRC ON
LPCMSELECT OFF
. lOOL8YDIGITAL
i
BITSTREAM
DTS BITSTREAM
AUDK) MODE HOMI
ORC ON
LPCMSELECT OFF
OOLBYOIGITAL BlrSTREAM
DTS airSTREAM
f AUDIO MODE
I
HOMI
1
~"~~~~.
RATING LEVEL
'I"
=
~!~-'7]
5
4 [PG13]
3[PG]
1
=~~r~~.
DRC ON
LPCMSELECT OFF
. OOLBYDIGITAL BITSTREAM
~eITSTREAM
AUDIO MODE HOMI
You can set a viewing limit through Rating Level. Playback of
the discs will stop if the disc's general rating exceeds the limit
you set.
o
Press the SETUP button in stop mode.
fJ
Press the Cursor buttons (.... or~) to seJect CUSTOM,
then press the ENTER button.
~ Press the Cursor buttons (..... or ~)
to select RATINGS, then press the
ENTER button.
D
Press the Numeric buttons to enter
your four-digit password.
o
When doing this for the first time,
enter any four-digit number by
pressing the Numeric buttons
(except for 4737), then press the ENTER button. That num-
ber will be used as the password from the second time
onward. Record your password in case you forget it.
o
If you forget the password, press 4, 7, 3, 7. The original
password will be cleared and rating ,.- _________
levels will be set to ALL. Enter a
new four-digit password, then press
the ENTER button.
~ Press the Cursor buttons (.6. or .... )
to select RATING LEVEL, then
press the ENTER button.
m
Press the Cursor buttons (.6. or .... )
to select a desired level, then press
the ENTER button.
D
Press the SETUP button to exit and
activate the new settings.
NOTES:
o
This function may not work on some
DVDs. Be sure if the RATINGS ' - - - - - - - - - - - . /
operates in the way you have set.
o
The resume information will be cleared if you change the
parental level when the resume information is on.
To Change the Password:
1) Follow the steps
0
to
D
above.
2) Press the Cursor buttons (.6. or .... ) to select PASSWORD
CHANGE, then press the ENTER button.
3) Enter a new four-digit password, then press the ENTER
button.
4) Press the SETUP button to exit.
DTS
(Default: BITSTREAM)
iI.Iil
o
Set to BITSTREAM when the unit is
connected to a DTS decoder.
BITSTREAM:
DTS signals are output as Bilstream.
o
For HDMI connection, if the connect- '--===-=-,-----_ _--'
ed equipment is not compatible with the DTS Bitstream, the
signals are not output regardless of the setting.
OFF: No DTS sound will be output.
o
DTS sound is output only from digital audio outputs.
AUDIO MODE (Default: HDMI)
o
Set to HDMI when outputting the
HDMI sound.
o
Set to ANALOG when not out-
putting the HDMI sound.
~
Press the SETUP button to exit
and activate the new settings.
-<
Ratings Control
j
Ratings Control allows you to set a limit, which prevents your
children from viewing inappropriate materials on DVDs. A four-
digit password that you establish will give you the control.
I
RATING LEVEL
I ·
:"~c~:i.
OOLBYOIGITAL BlrSTREAM
OTS BITSTREAM
AUDIO MOOE H(lf,,11
I ~~
. TV ASPECT
43LEnE~eo:o:
STILL MODE AUTO
~~~~~SSIVE ~~~TI
PROG.MODE AUTQl
HDMISELECT VCbCr
~NOAMAL
1
=~.~.~,~.
TV ASPECT 43 LETIERoox
STILL MODE AUTO
TVTYPE MULTI
PROGRESSIVE OFF
PROG.MOOE AUTOl
IHOMISELECT I YCbC,
HOMI PICTURE NORMAL
1
:.:~:~
DTS BITSTAEAM
AUDIO MOOE HOMI
HDMI SELECT (Default: YCbCr)
o
Select an HDMI output mode
between YCbCr and RGB.
o
When the connected equipment is
not compatible with YCbCr, HDMI
signal is output as RGB regardless
of the setting.
HDMI PICTURE (Default: NORMAL)
o
Select a HDMI picture mode
between NORMAL and
ENHANCED.
o
Select ENHANCED if the black-
white contrast is not clear.
o
This setting is effective only for
HDMI RGB output.
~
Press the SETUP button to exit and activate the new settings.
NOTE:
o
Be sure to press the SETUP button, or the setting will not
work.
-<
Audio Setting
>-
You can change some Audio settings. It only affects during
the playback of DVD discs.
o
Press the SETUP button in stop mode.
fJ
Press the Cursor buttons (..... or ~) to select
CUSTOM, then press the ENTER button.
o
The custom mode will appear.
~ Press the Cursor buttons (..... or ~) ----------,~~
to select AUDIO, then the ENTER
button to confirm.
D
Press the Cursor buttons (.6. or .... )
button to select an item, then press
the ENTER button.
DRC (Dynamic Range Control)
(Default: ON)
o
DRC function compresses the
range of sound volume.
o
DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM SELECT (Default: OFF)
o
Set to ON when outputting in 48kHz.
o
This function is available only on
digital outputting of a disc recorded
in 96kHz.
o
When the HDMI sound is output,
the setting is disregarded.
When playing disc with
copyright protection
o
The sound will be down sampled at '-- --'
48kHz, even if you set to OFF.
DOLBY DIGITAL",< .
(Default: BITSTREAM)
~;III
o
Set to BITSTREAM when the player /"------~
is connected to a Dolby Digital
decoder.
o
This function is effective only for the
COAXIAL, OPTICAL and HDMI
connections.
BITSTREAM:
o
For HDMI connection, if the
connected equipment is not compatible with the
Dolby Digital BITSTREAM, the signals are output as
PCM regardless of the setting.
PCM: Convert Dolby Digital to PCM.
I
IF YOU FORGET THE PASSWORD
o
Press 4, 7, 3, 7 at step
D.
o
Password will be cleared and rating level will be set to ALL.
fJ
Repeat steps
D
to
D
to re-establish the parental lock.
-24-
EN