Advertisement
Panasonic NS700 Guide
Panasonic KX-NT630C
1. LCD (Liquid Crystal Display)
2. Flexible Central Office Buttons: Where line one,
line two and line three are held.
3. Soft buttons (S1-S4): S1-S4 (located from left to
right) are used to select the item displayed on the
bottom line of the display.
4. Message/Ringer Lamp: When you receive an
intercom call, the lamp flashes green and on an
outside call, the lamp flashes red. When someone
has left you a message, the lamp stays on red.
5. Next Page: Used to switch the page for the
flexible buttons.
6. Cancel: Used to cancel the selected item.
7. Navigator Key: Used to adjust the volume and
the display contrast or select desired items.
8. Message: Used to leave a message waiting
indication or call back the party who left the
message waiting indication.
9. Program/Pause: Used to insert a pause when
storing a telephone number and to program
functions.
10. Flash/Recall: Used to disconnect the current call
and make another call without hanging up.
11. Redial: Used to redial the last dialed number.
12. Auto Ans/Mute: Used to receive an incoming call
in hands-free mode or mute the microphone/handset
during a conversation.
13. Auto Dial/Store: Used for System/Personal Speed
Dialing or storing programming changes.
14. Conf: Used to establish a multiple party
conversation.
15. Transfer: Used to transfer a call to another party.
16. FWD/DND: Used to switch Call Forwarding or Do
Not Disturb on your extension.
17. Hold: Used to place a call on hold.
18. Intercom: Used to make or receive intercom calls.
19. SP-Phone: Used for performing hands-free
operations.
20. Microphone: Used for hands free conversations.
2
Hide quick links:
Advertisement
