Advertisement
Panasonic NS700 Guide
Panasonic KX-NT680C
1. LCD (Liquid Crystal Display)
2. Flexible Central Office Buttons: Where line
one, line two and line three are held.
3. Soft buttons (S1-S4): S1-S4 (located from
left to right) are used to select the item displayed
on the bottom line of the display.
4. Message/Ringer Lamp: When you receive
an intercom call, the lamp flashes green and on
an outside call, the lamp flashes red. When
someone has left you a message, the lamp
stays on red.
5. Cancel: Used to cancel the selected item.
6. Navigator Key: Used to adjust the volume
and the display contrast or select desired items.
7. Message: Used to leave a message waiting
indication or call back the party who left the
message waiting indication.
8. Program/Pause: Used to insert a pause
when storing a telephone number and to
program functions.
9. Flash/Recall: Used to disconnect the current
call and make another call without hanging up.
10. Redial: Used to redial the last dialed number.
11. Auto Ans/Mute: Used to receive an incoming
call in hands-free mode or mute the
microphone/handset during a conversation.
12. Auto Dial/Store: Used for System/Personal
Speed Dialing or storing programming changes.
13. Conf: Used to establish a multiple party
conversation.
14. Transfer: Used to transfer a call to another
party.
15. FWD/DND: Used to switch Call Forwarding or
Do Not Disturb on your extension.
16. Hold: Used to place a call on hold.
17. Intercom: Used to make or receive intercom
calls.
18. Speaker Phone: Used for performing hands-
free operations.
2
Advertisement
