Before Operating Your Unit - Deni 1830 Use And Care Instructions Manual

1830 Instructions 7/16/03 3:39 PM Page 4
HOW TO OPERATE THE
DENI FRESHLOCK TURBO II
VACUUM SEALER
White labeling strip

Before Operating Your Unit

Place your FRESHLOCK Turbo II on a firm,
level, dry surface and plug it directly into a
standard 110 AC outlet. (Extension cords may
prevent the unit from working properly. If
necessary always use an extension cord with
equal or greater rating.)
Your FRESHLOCK Turbo II includes two
rolls of superior-grade polyethylene plastic.
Place one roll in the unit and put the Heat-
Selector Switch on Medium (M).
Folded end of roll
Open end of roll
FIGURE 2
4