Ironing Tips - Telefunken HappyCare HCCV5 Instruction Manual

 The iron has an anti-drip function. If iron garments too long time, the temperature of soleplate
will decrease, the iron will stop coming out steam automatically and no water droplets can come
out from soleplate.
Note: During ironing, the system may occasionally produce a pumping sound. This is normal and tells
you that water is pumped into the soleplate.
WARNING:
steam at people! The supply cord may become hot during a long ironing session. Do not place
the iron on a metal support when in use as it may damage the soleplate, always place the iron
on the silicone support as it's equipped with thermal insulation cushion designed to withstand
high temperature.
4. Turning off your steam generator
 Put the iron on the steam station iron's thermal insulating cushion.
 Press on the button
when you hear a buzzing sound; you can disconnect the plug from the wall outlet.
 Always let your appliance cool down for at least one hour before storing it back. Pull the hook
towards you then rewind the sector and the steam cord around the base before storing it back.
 Après chaque utilisation, retirez le réservoir d'eau de son emplacement puis videz l'eau
restante du réservoir dans l'évier. After each use, always empty the water from the water tank
into a sink.
WARNING: Always let your steam generator cool down for at least one hour before putting
it back in its storage!

Ironing tips

 Always check first whether a label with ironing instructions is attached to the article. Follow
these ironing instructions in any case.
 If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
 Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such
object.
Do not touch hot soleplate at any time before cooling down! Never direct the
On/Off and hold for few secondes to switch off your steam generator,
ENGLISH
12