Maintenance And Service - DeLonghi EW0507 User Manual

GB-E 13-01-2004 14:26
Please note that when you first use your heater all the tabs are out. You must push in the tabs
that correspond to the period when you want the heater to be on. (If you want to bypass the
timer you must push all 96 tabs inward.)
Timer operation
A) Plug in the heater.
B) Turn timer dial clockwise to set clock with the current time of day (see CLOCK SETTING).
C) Push tabs inwards for the period you want the heater to operate. For example, in the
shown illustration, the heater will operate from 14.00 (2 p.m.) to 16.30 (4.30 p.m.) and
from 4.45 a.m. to 5 a.m.
D) Push switch(-es) in.
E) Once you have set the tabs for the desired heating periods, your heater will cycle on and
off according to these settings.
F) As long as you keep the heater plugged in, the timer will maintain the proper time.
A safety device
A safety device switches the heater off in the event of everheating. To restart the heater, call
the nearest Service center.

6. MAINTENANCE AND SERVICE

Always unplug the heater from the power outlet and allow the radiator to cool. Wipe radiator
with a soft damp cloth; do not use detergents and abrasives.
Should the radiator not be in use over a certain length of time, roll the cable around the holder
and store it in a dry place (see fig. on front page).
This appliance has been built to last for many years of trouble-free service.
In case of malfunction or doubt, do not try to repair the heater by yourself: this might increase
the risk of fire and electric shock.
Call your nearest Service Center (see attached list of Service Centers).
Pagina 5
5