24
English
Warranty and support
6 Insert a flat head screwdriver on either side of the
shaver body to release the hooks.
7 Slide the power unit out of the body.
8 Bend the snap hooks aside and remove the
transparent cover of the power unit.
9 Lift out out the battery holder and cut the wires
with a pair of cutting pliers or scissors.
10 Bend the battery tags aside with a pair of cutting
pliers or a screwdriver.
11 Remove the rechargeable battery.
If you need information or support, please visit
www.philips.com/support or read the international
warranty leaflet.
Warranty restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international warranty
because they are subject to wear.