Philips S5588 Manual page 21

2
1
1
2
3 Turn the retaining rings anticlockwise and remove
them. Place them aside in a safe place.
4 Remove the shaving heads from the shaving head
holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining ring.
- Each retaining ring has two recesses that fit exactly
into the projections of the shaving head holder.
Turn the ring clockwise until your hear a click to
indicate that the ring is fixed.
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach
the retaining rings. Do not place the shaving head
holder on a surface, as this may cause damage to
the shaving heads.
21
English