Display Mode Setup; Resume Factory Default - Alinco DJ-CRX2 Instruction Manual

FUNCTION MENU SETUP

Display Mode Setup

According to practical application, you can set the radio works as VFO mode or
Memory mode.
1.VFO MODE:
In this mode, the screen displays its corresponding frequency lists number, and
press "DISP" key can display the changing frequency list .
2.Memory mode :
In this mode, if the channel has edited its corresponding name, its will display the
channel number and its corresponding name,otherwise, it will displays channel
number and the channel frequency corresponding VFO frequency lists.
NOTE: In case the alphanumeric name tag is displayed, pressing the "DISP" key changes to frequency,
then pressing it again to display the channel number. It resumes the name tag display after 5 seconds
automatically. If the name tag is not programmed, pressing the "DISP" key changes to frequency, then
resumes the channel display after 5 seconds automatically.

Resume Factory Default

You can make all the settings of transceiver return to the factory default settings when transceiver can
not work normally because of wrong operation or error setup.
1. Press [MONI] key to turn on radio, hold [MONI] key until transceiver emits beep.
44