Removing The System Stabilizer Feet; Attaching The Rack-Adapter Plate - Dell PowerEdge 1800 Supplementary Manual
Installing the tower-to-rack and rack-to-tower kits
Hide thumbs
Also See for PowerEdge 1800:
- Installation and troubleshooting manual (160 pages) ,
- Hardware installation manual (112 pages) ,
- Information update (66 pages)
Table of Contents
Advertisement
Figure 1-3. Removing the System Stabilizer Feet
securing screws (4)
system stabilizer feet (4)
Attaching the Rack-Adapter Plate
1
Remove the system's right-side cover:
Remove the two back-panel screws that secure the right-side cover to the chassis. See
a
Figure 1-4.
Slide the right-side cover toward the back of the system and then lift it away from the
b
chassis.
8
Installing the Tower-to-Rack and Rack-to-Tower Kits
Advertisement
Table of Contents
