Miele DA 3568 Operating And Installation Instructions page 39

a Extraction, recirculation with
conversion kit DUU 150.
b The wall unit carcase needs to be
38 mm shorter than the wall unit
door.
c Installation is also possible in a
600 mm wide cabinet. The following
should be noted:
– The adjoining units must also be
shortened by 38 mm.
– The doors of the housing unit and
of adjoining units must open
upwards so that the grease filters
are accessible.
d Alternative ducting connection at the
back.
e Wall unit can be fitted with partition
wall after installation. Slots for the
grease filters, and with recirculation
mode for the charcoal filters, must
remain accessible.
f Alternatively the wall unit can be
fitted with side sections.
g If the wall unit has a base panel,
openings must be provided to adjust
the retaining force of the deflector
plate. Examples:
– The wall unit has side sections, as
shown.
– The cooker hood is installed in a
600 mm wide unit with units at
either side.
The height of the wall unit and cut-out
dimensions must take account of any
accessories fitted, e.g. silencer, DSM
module.
Installation
39