P
(
)
ATTERNS
MOIRÉ
From the printer control panel, press the Content button until the light comes on next to Text/Photo.
•
Rotate the original document on the scanner glass.
•
From the printer control panel, press the Scale button and adjust the setting.
•
T
EXT IS LIGHT OR DISAPPEARING
From the printer control panel, press the Content button until the light comes on next to Text or Text/Photo.
T
HE OUTPUT APPEARS WASHED OUT OR OVEREXPOSED
From the printer control panel, press the Content button until the light comes on next to Text/Photo or Photo.
•
From the printer control panel, press the Darkness button and change to a darker setting.
•
T
HE PRINT IS SKEWED
Notes:
If you are loading your original document in the ADF, adjust the ADF paper guides so they touch the edges
•
of the pages to be scanned.
Check the paper trays to make sure the guides touch the edges of the loaded paper.
•
Partial document or photo copies
These are possible solutions. Try one or more of the following:
C
HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
C
HECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Size setting.
2
Before sending the job to print, specify the correct size setting:
For Windows users, specify the size from Print Properties.
•
For Macintosh users, specify the size from the Page Setup dialog.
•
APPEAR IN THE OUTPUT
Troubleshooting
272