Removing The Memory; Installing An Optional Tray 2 - Dell 1600n Owner's Manual

Removing the Memory

Follow steps 1 and 2 on page 76 to access the control board.
1
Push the levers at both ends of the DIMM slot away from the DIMM.
2
Place the DIMM in its original packaging or wrap it with paper and store it in a box.
3
Follow from step 8 on page 78.
4

Installing an Optional Tray 2

You can increase the paper handling capacity of your multi-function printer by installing an
optional Tray 2. This tray holds 250 sheets of paper.
Power the multi-function printer off and unplug all cables from the multi-function
1
printer.
Remove the packing tape and the tape fastening the interface cable from the bottom
2
of the optional Tray 2.
Installing Options
7 9