Motorola MBP50 Faq page 7

Why am I getting a loud high pitched noise?
Your Baby and Parent Units may be too close to one another. Move them farther apart.
Make sure there is at least 1 to 2 metres between the 2 units to avoid audio feedback.
Why is the talk back feature not working?
Increase the volume on the Parent Unit.
Check that you have released the button after speaking to hear the response. The button is pressed
only when you are speaking.
The parent and baby unit may be out of range. Reduce the distance between the two.
Verify that the connections on the Baby Unit and at the electrical outlet are secure.
Lift the antenna on the Parent Unit for optimal reception.
Connection issues
What should I do if the Baby Unit has lost its connection with the Parent Unit?
Try recharging or press the Reset button once on the Parent Unit
If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the
Parent Unit.
Is the Unit turned on? Press and hold the ON/OFF button on the Parent Unit to turn it ON.
Is the correct Camera selected? Change the Camera number, if necessary.
Is the video display turned on? Press the VIDEO ON/OFF button to turn it ON.
When operating using batteries only, the display will go blank after 4 minutes to save power. The
unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button.
To Reset the Parent Unit, press the reset button, disconnect the battery pack on the Parent Unit and
unplug both the Units' electrical power, then plug them back in. Wait about 15 seconds before
reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronise
Please contact our customer service team for queries, warranty, support or service related to the
product at +44(0) 844 557 0890 (UK - calls cost 7p per minute plus your telephone company's
standard access charge). Calling from ROI please dial +44(0) 8187 62092.
Email: support@motorolahome.com. Web support at www.motorolastore.support/en