4-44
Dell Latitude XPi CD Service Manual
Audio Board
hard-disk
drive bracket
audio
board
audio
connectors
connector JAUDIO
connector JTB
HD1 (6 mm)
Figure 4-32. Audio Board Removal
Part or Assembly Name
Audio board
To remove the audio board, follow these steps:
1. Remove the palmrest assembly.
2. Remove the display assembly.
3. Remove the superpart assembly.
4. Remove the system board.
5. Remove the hard-disk drive bracket.
Turn the system board over and place it on a flat work surface. Remove
screw HD1, which secures the bracket to the system board. Turn the system
board over so that the bracket is on the top. Use a plastic scribe or a small
flat-blade screwdriver to pry the bracket from connector JTB. Gently push
the bracket outward from the system board until the bracket is disengaged
from the audio connectors, and lift the bracket away from the system board.
6. Lift the audio board straight up from the system board.
The audio board is held in place on the system board by connector JAUDIO.
connector board
6 mm
Order Name
PWA,AUDIO,LXPiCD,NBK
system board