4-24
Dell Latitude XPi CD Service Manual
LCD Inverter Board
I1 (5 mm)
retaining bracket
Figure 4-18. LCD Inverter Board Removal
Part or Assembly Name
LCD inverter board
To remove the LCD inverter board, follow these steps:
1. Remove the display assembly bezel.
2. Remove screws I1 and I2 securing the display-interface cable retaining
bracket, and then remove the bracket.
3. Move the LED board out of the display assembly case far enough to
gain access to the LCD inverter board.
4. Disconnect the LCD-inverter board interface cable from ZIF connector
CN1 on the LCD inverter board.
5. Lift the LCD inverter board about
6. Disconnect the LCD power cable from connector CN2 on the LCD
inverter board.
7. Lift the LCD inverter board out of the display assembly case.
I2 (5 mm)
Order Name
ASSY,BD,INVRTR,TFT,SVGA12.1"
of an inch.
1/4
connector CN1
5 mm
inverter board
connector CN2
LED board
display assembly case