6 Disconnect the card from the cable and remove the card from the computer.
Coin-Cell Battery
CAUTION:
Before performing the following procedures, follow the safety instructions in your
Information Guide
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside
the computer.
1 Follow the procedures in "Before You Begin" on page 111.
2 Remove the hinge cover (see "Hinge Cover" on page 113).
3 Remove the keyboard (see "Keyboard" on page 113).
116
Adding and Replacing Parts
.
Product