Expansion-Card Cooling Fan And Guide; Removing An Expansion-Card Cooling Fan And Guide - Dell Precision 530 Service Manual

Expansion-Card Cooling Fan and Guide

•

Removing an expansion-card cooling fan and guide

• Replacing an expansion-card cooling fan and guide
NOTE: The expansion-card cooling fan is mounted on the expansion-card
guide.
Removing an Expansion-Card Cooling Fan and Guide
CAUTION: Before you perform this procedure, see
For You and Your Computer."
NOTICE: Before disconnecting a device from the computer or removing a
component from the system board, verify that the standby power light on the
system board has turned off. To locate this light, see
Components."
Turn off the computer and devices, disconnect them from their
1
electrical outlets, wait at least 10 to 20 seconds, lay the computer on its
right side, and open the computer
Remove any full-length expansion
2
NOTE:
There may not be any full-length expansion cards in the computer.
Disconnect the fan power cable from its connector on the system
3
board (FAN_CCAG). To locate this connector, see
Components."
Press the release tabs outward from the expansion-card fan and guide,
4
and lift the fan/guide up and out of the guide bracket (see the
following figure).
"Safety First—
"System Board
cover.
cards.
"System Board
89