Dell Precision 530 Service Manual page 111

Carefully set the microprocessor in the socket and press it down
c
lightly to seat it.
Rotate the socket lever back toward the socket until it snaps into
d
place, securing the microprocessor.
I n s t a l l i n g t h e M i c r o p r o c e s s o r
microprocessor
microprocessor socket
Install the replacement microprocessor heat sink:
6
NOTICE:
Remove the film covering only when you are ready to replace the
heat sink. Once the film covering has been removed, lay the heat sink down
with the thermal grease facing upward. Do not lay the heat sink down with the
thermal grease touching the work surface.
Remove the film covering the thermal grease on the bottom of the
a
heat sink.
socket lever
microprocessor
pin-1 indicator
socket pin-1
indicator
111