Zone And Room Number Assignments - LG Pro Centric 49UT567H Setup Manual

EZ-Manager Wizard (Cont.)
(Continued from previous page)
Use the Up/Down arrow keys on the Installer Remote to navigate between options on this screen.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
wizard's Zoning, network settings, or USB configuration options, exit the wizard as follows: Select
NO PRO:CENTRIC, and then press OK. This will disable the Pro:Centric feature of this TV (i.e.,
Installer Menu item 119 DATA CHANNEL will be set to 0) and exit the wizard. In the exit confirmation
screen, select EXIT, and then press OK once more on the Installer Remote.
• To continue with Pro:Centric configuration, select NEXT (default) and press OK on the Installer
Remote. See "Configure Pro:Centric Settings" on pages 24 to 29 for additional information.
Note: By default, any applicable maintenance (E-Z Installation) files are downloaded as part of the
TV configuration. If you would like to skip the initial maintenance file download, select the
toggle button on the screen and press OK to change the value to
still be downloaded during the daily update event, per Installer Menu item 121 setting.
• To set the Zoning feature on the TV, select ZONE & ROOM NUMBER. See "Zone and Room
Number Assignments" below for further information.
• To configure the network settings of the TV, select NETWORK SETTINGS. See "Network Settings"
on pages 23 to 24 for further information.
• To access the TV Manager / USB download options, select USB CONFIGURATION. See "USB
Configuration" on pages 29 to 30 for further information.

Zone and Room Number Assignments

You may complete one or more of the fields in the Zone, Label, and Room Number screen or leave
them at their default settings (TV Zone) or blank (Label and Room Number), as desired. However,
if you intend to use the Zoning feature on this TV, you MUST specify the appropriate values in the
TV Zone field as described below. See Reference section, "Using the TV Zoning Feature," for further
information.
ZONE, LABEL, AND ROOM NUMBER
TV Zone
< >
0
Label
< >
-----
Room Number
Room Number
BACK SAVE
22
.
If creating Zones for Installer Menu settings and/or
Channel Mapping, select the appropriate TV Zone #
(0-8) based on the Zone in which this TV is installed.
(See Commercial Mode Setup Guide for more
information.)
.
Select a Label and/or input the Room Number, as
required.
.
When done, select SAVE to continue.
(Yes)
(No). Maintenance files will
02
(Continued on next page)
206-4351