Table of Contents
Advertisement
Solution Settings / EZ-Manager Wizard (Cont.)
(Continued from previous page)
Use the Up/Down arrow keys on the Installer Remote to navigate between options on this screen.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
wizard's Zoning, network settings, or USB configuration options, exit the wizard as follows: Select
NO PRO:CENTRIC, and then press OK. This will disable the Pro:Centric feature of this TV (i.e.,
Installer Menu item 119 DATA CHANNEL will be set to 0) and exit the wizard. In the exit confirmation
screen, select EXIT, and then press OK once more on the Installer Remote.
• To continue with Pro:Centric configuration, select NEXT (default) and press OK on the Installer
Remote. See "Configure Pro:Centric Settings" on pages 28 to 32 for additional information.
• To set the Zoning feature(s) on the TV, select ZONES & ROOM NUMBER. See "Zones and Room
Number Assignments" below for further information.
• To configure the network settings of the TV, select NETWORK SETTINGS. See "Network Settings"
on pages 25 to 27 for further information.
• To access the TV Manager / USB download options, select USB CONFIGURATION. See "USB
Configuration" on pages 32 to 33 for further information.
Zones and Room Number Assignments
You may complete one or more of the fields in the Zones, Label, and Room Number screen or
leave them at their default settings (TV Zone and Wi-Fi Zone) or blank (Label and Room Number),
as desired. However, if you intend to use either of the Zoning features—TV Zoning and/or Wi-Fi
Zoning—on this TV, you MUST specify the appropriate values in the TV Zone and/or Wi-Fi Zone fields
as described below. See Reference section, "Using the TV's Zoning Features," for further information.
Note: Zoning features are only applicable for TVs that will be configured using a ".tlx" file (local or
remote configuration).
ZONES, LABEL, AND ROOM NUMBER
Wi-Fi Zone
<
>
0
TV Zone
<
>
0
Label
<
>
-----
Room Number
Room Number
BACK
SAVE
BACK
SAVE
24
.
If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi
Zone # (1-99) based on the Wi-Fi Zone in which this TV is installed.
.
If creating Zones for Installer Menu settings and/or Channel Mapping,
select the appropriate TV Zone # (0-8) based on the Zone in which
this TV is installed. (See Commercial Mode Setup Guide for more
information.)
.
Select a Label and/or input the Room Number, as required.
.
When done, select SAVE to continue.
02
(Continued on next page)
206-4354
Advertisement
Table of Contents
