Installing A Tapi Sound Card - Dell OptiPlex GX240 User Manual

Reconnect the computer and devices to their electrical outlets, and
7
turn them on.
Install the appropriate TSP for the TAPI device.
8
See the manufacturer's documentation and your Windows
documentation for more information.

Installing a TAPI Sound Card

You can install a TAPI-compliant sound card that has a standard TAPI
connector. For example, you can connect your modem to the TAPI sound
card connector and then use the audio capabilities as a speakerphone.
CAUTION: Before you perform this procedure, see
Safety Instructions."
NOTICE: Before disconnecting a device from the computer, wait 10 to 20
seconds after disconnecting the computer from its electrical outlet. Before
removing a component from the system board, verify that the standby power
light on the system board has turned off. To locate this light, see
Board Components."
Turn off the computer and devices, disconnect them from their
1
electrical outlets, and wait 10 to 20 seconds.
Open the computer
2
Install the TAPI-compliant expansion card.
3
See the manufacturer's documentation for more information.
Enter system setup, click Integrated Devices, and change the setting
4
for Sound to Off.
Connect external audio devices to the sound card's connectors. Do not
5
connect external audio devices to the microphone,
speaker/headphone, or line-in connectors on the I/O panel (see
Panel—Small Form-Factor, Desktop, and Mini-Tower
Connect the 4-pin TAPI cable to the TAPI sound-card connector.
6
To locate the TAPI connector on the sound card, see the
manufacturer's documentation.
Connect the 4-pin TAPI cable to the TAPI expansion-card connector.
7
To locate the TAPI connector on the expansion card, see the
manufacturer's documentation.
cover.
"CAUTION:
"System
"I/O
Computers").
Installing Upgrades
NOTE:
If enabled, the
Chassis Intrusion
option
causes the following
message to be displayed
at the next system start-
up: ALERT! Cover
was previously
removed.
87