Reattaching Hard Drive Cables - Dell OptiPlex GX240 User Manual

If your replacement hard drive does not have the bracket rails
3
attached, remove the rails from the old drive by removing the two
screws that secure each rail to the drive. Attach the bracket rails to the
new drive by aligning the four screw holes of the drive and bracket and
then inserting and tightening the screws that came with your upgrade
kit.
H a r d D r i v e B r a c k e t R a i l s
Install the hard drive into the computer by gently sliding the drive into
4
place until you hear it securely click.

Reattaching Hard Drive Cables

Connect the power cable and hard-drive data cable to the drive.
1
1 drive
2 bracket rails (2)
3 screws (4)
1
2
3
Installing Upgrades
119