Using The Dell Optiplex Resourcecd - Dell OptiPlex GX240 User Manual

S o l v i n g P r o b l e m s
Hardware devices conflict
Computer memory amount is not
correct
System board malfunctions
System board is damaged
An error message
A series of beeps on computer startup

Using the Dell OptiPlex ResourceCD

To use the Dell OptiPlex ResourceCD while you are running the Microsoft
®
Windows operating system, perform the following steps:
Insert the Dell OptiPlex ResourceCD into the CD drive.
1
If you are using the Dell OptiPlex ResourceCD for the first time on this
computer, the ResourceCD Installation window opens to inform you
that the ResourceCD is about to begin installation.
Click OK to continue.
2
To complete the installation, respond to the prompts offered by the
installation program.
Click Next at the Welcome Dell System Owner screen.
3
Select the appropriate System Model, Operating System, Device
4
Type, and Topic.
To access the Dell OptiPlex ResourceCD Guide, click User's Guides in the
Topic pull-down menu and click Dell OptiPlex ResourceCD.
Drivers for Your Computer
To display a list of device drivers for your computer using the
ResourceCD, perform the following steps:
Click My Drivers in the Topic pull-down menu.
1
The ResourceCD scans your computer's hardware and operating
system, and then a list of device drivers for your system configuration
is displayed on the screen.
See "Hardware Conflicts"
See "Computer Memory Problems"
See "System Board Problems"
See "Resetting a Damaged System
Board"
See "Messages and Codes"
See "Messages and Codes"
Dell OptiPlex
®
NOTE: To access device
drivers and user
documentation, you must
ResourceCD
use the
you are running Windows.
So l vi n g Pro b l em s
while
165