Resetting the Chassis Intrusion
Detector
Enter system setup by pressing <F2> during the computer's POST.
1
NOTE:
For instructions on using system setup, see the
Under the System Security tab, reset the Chassis Intrusion option by
2
pressing the left- or right-arrow key to select Reset. Change the setting
to Enabled, Enabled-Silent, or Disabled.
The default is Enabled-Silent.
NOTE:
Press <Alt><B> to restart the computer and implement your
3
changes.
User's Guide
.
Chassis Intr usion Switch
NOTE:
If a setup
password has been
assigned by someone else,
contact the network
administrator for
information on resetting
the chassis intrusion
detector.
39