Dell OptiPlex GX240 Service Manual page 84

FILE LOCATION: S:\SYSTEMS\Meteor\SM\A03\drives.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 2 6 / 0 2
84
Driv es
Remove the two green plastic drive rails inside the lower hard-drive
4
bay.
These rails are not attached with screws to the inside of the hard-drive
bay. To remove the rails, gently pull the rails up and out of the bay.
Attach the rails to the hard drive using the two screws attached to the
5
rails.
Ensure that the rail tabs are positioned at the back of the hard drive.
NOTICE: Do not install a drive into the lower hard-drive bay until you remove
the green drive rails from inside the lower hard-drive bay.
Remove the first hard drive from the upper bay and install it in the
6
lower bay.
Disconnect the power cable and the data cable from the back of
a
the first hard drive.
Press in the two green rail tabs and pull the first hard drive out of
b
the upper bay.
Gently slide the first hard drive into the lower bay until you hear a
c
click.
Reconnect the power cable and the data cable to the back of the
d
hard drive.
Gently slide the new hard drive into the upper bay until you hear a
7
click.