102
E x p ans ion- Ca r d C ag e (S ma ll D es ktop C om pute r Only)
Removing the Expansion-Card Cage
CAUTION:
Use a wrist grounding strap as explained in
"Precautionary
Measures."
Examine any cables connected to expansion cards through the back-
1
panel openings, and disconnect any cables that will not reach the
expansion-card cage once it is removed from the computer.
Remove any cables connected to the expansion card.
2
Gently pull on the handle and lift the expansion-card cage up and
3
away from the computer.
E x p a n s i o n - C a r d C a g e R e m o v a l
Replacing the Expansion-Card Cage
Align the slots in the side of the expansion-card cage with the tabs on
1
the side of the computer, and slide the expansion-card cage down into
place.
Make sure that the riser board is fully seated in the RISER connector
2
on the system board.