Dell Dimension 2300 Owner's Manual page 65

6 USB 2.0 connectors (2)
7 power button
8 power light
9 floppy drive light
10 CD or DVD volume
control dial
11 CD or DVD headphone
connector
12 service tag
For quick connections, Dell recommends using the front USB connectors for USB
devices such as digital cameras, gaming controllers, and scanners. Use the back-
panel USB connectors for USB mouse and keyboard connections.
Press the power button to turn on the computer.
NOTICE: To turn off your computer, perform a Windows
instead of pressing the power button. Otherwise, you may lose data.
The power light is solid green for the computer's power-on state and blinking
green for its standby state.
The floppy drive light is on when the computer reads data from or writes data to
the floppy drive.
Move the dial to adjust the volume of your audio CD or DVD disc.
Use the headphone connector to attach headphones to the CD or DVD drive.
Your headphones won't work if the drive is operating in digital mode. To disable
digital mode:
Click the Start button, click Control Panel, and then click Sounds, Speech,
1
and Audio Devices.
Click Sounds and Audio Devices.
2
Click the Hardware tab.
3
Double-click the name of your CD or DVD drive.
4
Click the Properties tab.
5
Uncheck the Enable digital CD audio for this CD-ROM device box.
6
HINT: Express Service may not be available in some countries.
This label lists your computer's service tag and your Express Service Code (if
applicable). If you call Dell technical support, use your Express Service Code to
route the call directly to the correct support personnel. The Dell technical support
staff will ask for your service tag.
®
shutdown
65
Adding Pa rts