Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Stanley Fatmax SFMCF810
Summary of Contents for Stanley Fatmax SFMCF810
- Page 1 SFMCF810...
- Page 2 English (original instructions)
-
Page 4: Intended Use
ENGLISH (Original instructions) Intended use Your STANLEY FATMAX SFMCF810 impact driver has been designed for screwdriving and nut setting applications. This appliance is intended for professional and private, non- professional users. Safety instructions General power tool safety warnings Warning! Read all safety warnings,... - Page 5 (Original instructions) ENGLISH f. If operating a power tool in a damp location is adjustments, changing accessories, or storing power unavoidable, use a residual current device (RCD) tools. Such preventive safety measures reduce the risk of protected supply. Use of an RCD reduces the risk of starting the power tool accidentally.
- Page 6 ENGLISH (Original instructions) Residual risks f. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature Additional residual risks may arise when using the tool which above 130 °C may cause explosion. may not be included in the enclosed safety warnings.
-
Page 7: Electrical Safety
Assembly Warning! Before assembly, remove the battery from the tool. Chargers Use your STANLEY FATMAX charger only to charge Charging the battery (Fig. A) the battery in the tool with which it was supplied. Other The battery needs to be charged before first use and batteries could burst, causing personal injury and damage. - Page 8 Battery state of charge indicator (Fig. B) Please visit our website www.stanley.eu/3 for further information. The battery includes a state of charge indicator to quickly determine the extent of battery life as shown in figure B. By...
-
Page 9: Maintenance
Li-Ion Li-Ion Li-Ion Li-Ion Your STANLEY FATMAX tool has been designed to operate over a long period of time with a minimum of maintenance. Level of sound pressure according to EN62841: Continuous satisfactory operation depends upon proper tool Sound pressure (L ) 91 dB(A), uncertainty (K) 3 dB(A) care and regular cleaning. -
Page 10: Ec Declaration Of Conformity
EN62841-1:2015, EN62841-2-2:2014. These products also comply with Directive 2006/42/EC, 2014/30/EU and 2011/65/EU. For more information, please contact STANLEY Europe at the following address or refer to the back of the manual. For more information, please contact STANLEY FATMAX at the following address or refer to the back of the manual. - Page 12 United Kingdom STANLEY FATMAX Tel. 01753 511234 270 Bath Road Fax 01753 572112 Slough, Berkshire SL1 4DX www.stanleytools.co.uk N716824 REV-0 10/2019...