If operating a power tool in a damp location is Intended use unavoidable, use a residual current device (RCD) Your Stanley FatMax SFMCF900 impact wrench has been protected supply. Use of an RCD reduces the risk of designed for screwdriving and nut setting applications.
Page 5
(Original instructions) ENGLISH c. Prevent unintentional starting. Ensure the switch is in g. Use the power tool, accessories and tool bits etc. in the off-position before connecting to power source accordance with these instructions, taking into and/or battery pack, picking up or carrying the tool. account the working conditions and the work to be Carrying power tools with your finger on the switch or performed.
● Injuries caused when changing any parts, blades Chargers or accessories. ● Use your Stanley FatMax charger only to charge the ● Injuries caused by prolonged use of a tool. When battery in the tool with which it was supplied. Other using any tool for prolonged periods ensure you take batteries could burst, causing personal injury and damage.
Page 7
Charger LED Modes ● If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Stanley FatMax Service Centre in order to avoid a hazard. Charging: Green LED Intermittent Mains plug replacement (U.K.
(10) holding the belt hook Maintenance is secure. Your Stanley FatMax tool has been designed to operate Note: When attaching or replacing the belt hook (9), use only over a long period of time with a minimum of maintenance.
Charger SFMCB11 SFMCB12 SFMCB14 Stanley FatMax is confident of the quality of its products and offers consumers a 12 month guarantee from the date Input Voltage of purchase. This guarantee is in addition to and in no way Output Voltage prejudices your statutory rights.