Step 1- Access Point Initial Configuration; Step 2- Setting Up Device Ip Address - Quantum QN-H-220 Quick Setup Manual

Step 1- Access Point Initial Configuration


Connect WAN port of the Access Point to network with internet access.

You should see a new wireless network with SSID QN_XX:XX (where XX:XX are last
four digits of Access Point MAC Address).

Connect to QN_XX:XX SSID and browse Access Point's default IP "169.254.1.1". You
should be greeted with welcome message.
Figure 1

Step 2- Setting Up Device IP Address


Click Start Configuration (Refer Figure1).

Configure IPv4 by selecting required option DHCP, Static or PPPoE and click Next.
Figure 2
www.qntmnet.com