Step 4- Access Point Quick Setup In Cloud Controlled Mode; Step 5- Create New Account On Qn-Rudder - Quantum QN-H-220 Quick Setup Manual

Step 4- Access Point Quick Setup in Cloud Controlled Mode


Select "Management Mode" as "Cloud Controlled", enter cloud login credentials and
click "NEXT". (If you do not have an account on QN-RUDDER, please refer Step 5)

Select Cloud Controller site, where Access Point needs to be added and click "Next".

User can select Access Point Operation Mode as Bridge or Router.

Bridge

Select Operation Mode as Bridge and click "Next".

Click Reconfigure if any changes required or click Finish to complete the
Configuration.

Router

Configure WLAN (SSID) and Local subnet parameters and click "Next".

If you do not want to create WLAN (SSID)/LAN now, click Skip, it will
redirect to Configuration Summary.

Review the Configuration Summary. Click Reconfigure if any changes
are required or click Finish to complete the configuration.

Step 5- Create New Account on QN-RUDDER


Browse https://cc.qntmnet.com.

Click "Create New Account" to sign up for a new account.
Figure 3

Configure WLAN (SSID) parameters, click Next and review the
Configuration Summary.

If a site has predefined wireless network in cloud, the device would
import settings and redirect to Configuration Summary.
www.qntmnet.com