Before You Begin; Package Contents; Prerequisites; Network Requisites - Quantum QN-I-210 Quick Setup Manual

Before you begin

Your Quantum Networks® Access Point can work in "Standalone Mode" or can be
managed by "RUDDER".

Package contents


Access Point.

Prerequisites


Internet access.

Desktop / Laptop / Handheld device.

802.3af / 802.3at PoE Switch / PoE Injector.

48VDC 2A DC power adapter.

Network requisites

The listed ports must be opened or allowed in the network firewall.

TCP: 80, 443, 2232, 1883.

UDP: 123, 1812, 1813.

Allow rudder.qntmnet.com and reports.qntmnet.com in the destination field.

Connect Access Point


After unpacking Access Point, connect it to an Internet source.

Plug-in Ethernet cable of Access Point.

Power on Access Point by using 802.3af / 802.3at PoE Switch / PoE Injector.
Note: Access Point must have Internet access during initial setup for the first time to activate
the device, warranty and support.
| www.qntmnet.com
5