Getting Started; Battery Removal And Installation - VTech Myla’s Sparkling Friends Penny Parents' Manual

GETTING STARTED

The batteries included are for demo purposes only. Please replace
the low capacity Try Me batteries with new batteries for the best
performance. Slide the Demo/Off/On Switch to the ON position to
start.
NOTE:
Playing at close range for a prolonged period of time may cause
fatigue or discomfort. We recommend that children take a 15-minute
break for every hour of play.

Battery Removal and Installation

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
back of the unit, use a screwdriver
to loosen the screw and open the
battery box.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance).
5. Replace the battery cover and
tighten the screw to secure.
4