Advertisement
Configuring CRE or RPE to communicate with the VeriFone Pinpad SC5000
To configure CRE or RPE to communicate with the SC5000, start CRE or RPE, select Manager,
provide the requested credentials, and follow these steps.
Note: to test the pinpad you must have a credit card processor setup which you will setup in the
setup screen. Please see:
http://faq.pcamerica.com/paymentprocessing
1. Select Setup and then Setup Screen.
2. Select the Hardware tab.
3. Select the COM port being used by the
SC5000 using the COM port found in
step 7 of the previous section.
4. Set the PinPad Type to
VerifoneSC5000.
5. Set the PinPad Connection to USB.
6. Select Update.
for more information.
5 |
P a g e
Advertisement
