Dismantling The Filter; Cleaning The Filter Parts Dry; Cleaning The Filter Parts With Water - Miele PDR 507 EL Operating And Installation Instructions

 Pull the filter out by its handle.

Dismantling the filter

 Hold onto both handles on the filter.
 Turn the inner part of the filter anti-
clockwise slightly until you feel it click
(1).
 Pull apart the two parts of the filter
(2).
Cleaning and care

Cleaning the filter parts dry

Useful tip: The best cleaning result can
be achieved with a vacuum cleaner.
 Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.

Cleaning the filter parts with water

If there is a lot of compacted fluff on the
filter parts, you should also clean them
under warm running water.
Ensure the filter is dry before
replacing it. Damp or wet filters can
cause operational faults.
Shake both parts thoroughly and
then dry them carefully.
45