Loading Laundry; Adding Detergent And Care Product; Starting The Programme - Bosch WAX32EH0ES User Manual And Installation Instructions

Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if
5.
required.
a The programme is saved.

Loading laundry

Notes
¡ Please read the information in the
"Safety" → Page 4 and "Preventing
material damage" → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
"programme" → Page 29.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 38
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it
3.
in the drum.
Note: Ensure that there is no laun-
4.
dry trapped in the door.
Close the door.
Adding detergent and care
product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent to the manual
dosing compartment.
Notes
¡ Please read the information in the
"Safety" → Page 4 and "Preventing
material damage" → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ The dosing recommendation is
aimed at the maximum load for the
programme.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Requirement: Find out the optimum
dosage for "detergent and care
product." → Page 40
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 21
If required, add the care product.
3.
Push in the detergent drawer.
4.

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Inicio/Pausa+Carga
▶
Basic operation en
.
43