The Drain Hose At The Siphon Is Blocked; Filter In The Water Supply Is Blocked - Bosch WNA13400ES Instruction Manual And Installation Instructions

Table of Contents

Advertisement

The drain hose at the siphon
is blocked
Turn the programme selector to Û
1.
(Off). Pull out the mains plug.
Loosen the hose clamp. Carefully
2.
remove the drain hose; residual
water may leak out.
Clean the drain hose and siphon
3.
connecting piece.
Re-attach the drain hose and secure
4.
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select any programme (except à
2.
(Rinse), 0 (Spin), [ (Drain)
programmes).
Select the A Inicio/Pausa + Carga
3.
(Start/Reload) button. Allow the
programme to run for approx. 40
seconds.
Turn the programme selector to Û
4.
(Off).
Pull out the mains plug.
5.
Cleaning and maintenance
Clean the filters:
Disconnect the hose from the rear of
1.
the appliance.
Use pliers to remove the filter.
2.
Clean the filter with a small brush.
3.
Connect the hose and check for
4.
leaks.
en
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents