Setting Up The Ssd6540M; Driver Installation For Windows - HighPoint SSD6540M User Manual

6. After installing the hard drives, connect the SSD6540M to a power
source.
7. With the power cord connected to the power source, turn on the
SSD6540M using the power button on the rear panel (click the
button to power on the SSD6540M).
8. Connected the SSD6540M to the Controller Card with the HD
mini-SAS cable.

Setting up the SSD6540M

Driver Installation for Windows

1. Boot up the Windows operating system.
2. Download the Windows driver package from the HighPoint
website:
http://highpoint-tech.com/USA_new/series-ssd6540m-download.htm
3. Extract the package and click the setup.exe program to install the
driver. The installation program will install the SSD6540M
Driver, automatically.
4. If prompted by Windows, reboot the system after the driver is
installed to complete installation.
5. After reboot the Windows, open Device Manager.
A HighPoint NVMe RAID Controller entry should appear under
Storage Controllers
7