Advertisement
Detailed instructions are given on the following pages; also see section "5. What to do if...".
1. Switch the
appliance on
2. Select the right type
of detergent
3. Fill the detergent
dispenser
4. Check the rinse aid level
5. Set the water
hardness level
6. Check the salt level
7. Load the racks
8. Turn on the water
tap, close the door
9. Select a programme,
and start
Wash cycle
10.End of programme
11.Open the door
12.Turn off the water tap,
unload the racks
2
2. QUICK REFERENCE GUIDE
The dishwasher switches on automatically when any button is pressed, except for the
button. If no button is pressed within 30 seconds, the appliance switches to Energy
Saving mode.
Depending on the dishwasher model
Programme
selection
button
Programme
selection
button
Fill crockery: beware of hot steam! The
start indicator blinks, close the door, press
the Start button again, the programme
resumes from where it had stopped (as
happens after a power shortage as well).
Programme
selection
button
Change the programme
in progress:
- Press the "Cancel/Off" button.
- (Water drains for up to 60
seconds).
- Select a new programme.
- Press the START button.
Advertisement
