Zoom G1 FOUR Quick Manual page 5

Editing effects (EDIT mode)
In EDIT mode, you can change the effects used in a patch memory and adjust their
parameters. Select a patch memory in MEMORY mode beforehand to edit it in EDIT
mode.
1.
Activate EDIT mode.
• Press
Unit number
2.
Select an effect to edit.
• Press –
3.
Turn the effect ON/OFF.
• Press the same
4.
Adjust the effect parameters.
If an effect has 5 or more parameters, use
NOTE
When the AUTO SAVE function is ON, changes to effects will be automatical-
ly saved. (
.
Effect name
Parameters
.
– as in step 2 again.
OFF
P .10)
1
4
2, 3
ON
to change the screen.
5