Interface Connection; Interface Cables - Datamax Mark II E-4205e Operator's Manual

2.2.2 Interface Connection

The printer can be connected to the host via a USB, serial, or parallel cable.
An optional Wired or Wireless LAN interface is also available. For information on using this interface, refer to
Appendix C.
Connection
Connection

2.2.3 Interface Cables

Choose a connection method that will best serve your purpose:
To connect the printer to the host's serial (RS-232C) interface use an acceptable cable

configuration, as shown below (contact your reseller for ordering information).
To connect the printer to the host's parallel interface use a Centronics parallel cable.

To connect the printer to the host's USB interface use a standard USB cable.

Note that the printer has a versatile communications feature: When connected to more than one interface, the
printer will automatically connect to the first port (serial, parallel, or USB) from which valid data is received.
After this connection has been made, the printer's power must be cycled 'Off' and 'On' to change the interface
connection.
4
Serial
Parallel
To Host
Part # 32-2483-01
USB
Connection
LAN Connection
(optional)
Part # 32-2301-01
Chapter 2 – Printer Setup