BT DF60 User Manual page 25

To set the Remote Access Facility
You can operate the answering machine from
another telephone using the Remote Access
Facility. This is useful if you are on holiday or
away on business and you want to play back
messages and memos.
Press the TAD and
•
display will show:
REMOTE TAD: OFF?
Change the display to
•
NO button. The display shows:
TAD: ON?
Press the YES button and the display shows:
•
PASSWORD: 0000
Enter a 4 number code using the keypad.
•
Press the YES button to confirm your entry.
•
Press the STOP/CLEAR button.
•
Display shows:
TAD FUNCTION
Press the STOP/CLEAR button to return to
•
standby mode.
For your code make it an easy-to-remember
number, eg Birthdays, house numbers etc. Using
your confidential code, only you will be able to
operate the answering machine from an outside
location, using any TouchTone telephone.
Using the Remote Access Facility
When the Remote Access Facility is set to
you can operate the answer machine
ON
from any Touch Tone telephone. After dialling
your number press the
during or after your outgoing message, the
answer machine stops and waits for your 4
number code.
buttons and the
by pressing the
ON
REMOTE
button twice
If your DF60's answer machine does not respond
you may need to press the
When you have entered the code you will hear
a long tone to confirm that you are in remote
access mode.
Using your Touch Tone keypad:
Press 1 and any messages will be
•
played back.
Press 2 and you can re-record your
•
outgoing message (OGM).
Press 3 to switch to Answering Machine
•
(TAD) mode on.
Press 4 to playback any recorded memos.
•
Press 5 to record a memo.
•
Press 6 to switch to Answering Machine
•
(TAD) mode off.
Press 8 to automatically delete the message
•
you are listening to.
Press 0 to exit from remote control mode or
•
to stop the current activity.
Using the answering
machine
button again.
22