Using the answering
machine
Press the DEL/REC button and the
•
display will show:
Press the YES button and the display shows:
•
LIFT HANDSET!!
If you are replacing a previously recorded
Outgoing Message (OGM) display shows:
Press the YES button.
NEW OGM?
Lift the handset and speak clearly into it to
•
record your message.
If you don't lift the handset and record a message
within 7 secs the display reverts back to TAD
FUNCTION. You must now repeat the last 2 steps.
When you have finished speaking, pause for
one second, then:
Replace the handset and your message is
•
played back to you.
Display shows:
Press the YES button to record your
•
message again.
Press the STOP/CLEAR button to return to
•
standby mode.
The amount of recording time allowed for an
outgoing message is the the same as that allowed
for a memo. (See 'to limit your memo recording
time', page 21).
17
RECORD OGM?
RECORD OGM?
To play back Outgoing Message (OGM)
To listen to the Outgoing message (OGM)
which you have recorded:
Press the TAD button and the display will
•
show:
TAD FUNCTION
Press the
II button and the display will
•
/
show:
MESSAGE EMPTY
PLAYBACK OGM?
If incoming messages have been previously
recorded your DF60 will display:
Fast forward to the end of the messages using the
button, display shows:
Press the YES button to listen to your
•
Outgoing message.
Press the STOP/CLEAR button to return to
•
standby mode.
, Followed by:
.
MESSAGE 01
PLAYBACK OGM?