Key Functions - Detecto PS-11 Owner's Manual

ON/OFF
1. Press and release the ON/OFF key to turn ON the scale.
2. Press and release the ON/OFF key to turn the scale OFF.
3. Press the ON/OFF key to confirm setting in Gravity Compensation mode.
MODE/OK
1. Press and hold the MODE/OK key to enter the Check Weighing Mode. The scale will
beep twice.
2. Press and hold the MODE/OK key to exit the Check Weighing Mode and return to the
Normal Weighing Mode. The scale will beep once.
UNIT/
1. Press the UNIT key to change the weighing units to the alternate units of measurement
(if selected during configuration of the scale).
2. In Check Weighing Mode, the UNIT key is used to advance to the next digit when
entering the Under and Over Limit weights.
3. Press the UNIT key to select menu in the Configuration mode.
TARE/ /
1. Press the TARE key to zero the weight display or to tare the weight of a container (ex: a
pan or a plate) up to the full capacity of the scale.
2. In Check Weighing Mode, the TARE key is used to increase the value of the blinking digit
from 0 to 9 when entering the Under and Over Limit weights.
3. Press and hold the TARE key and the ON/OFF key for 3 seconds to enter the
Configuration mode.
4. Press the TARE key to confirm the setting for each menu.
5. In Gravity Compensation mode, press the TARE key to choose number from 0~9.
4

KEY FUNCTIONS

8528-M310-O1 Rev C  PS-11